shop-talk
[Top] [All Lists]

Re: [Shop-talk] Has anyone used fix-a-floor?

To: Jim Franklin <jamesf@groupwbench.org> definitions=2020-06-21_11:2020-06-19, 2020-06-21 signatures=0 malwarescore=0 phishscore=0 bulkscore=0 spamscore=0 clxscore=1015 mlxscore=0 mlxlogscore=846 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-2004280000 definitions=main-2006210136
Subject: Re: [Shop-talk] Has anyone used fix-a-floor?
From: Pat Horne <patintexas@icloud.com>
Date: Sun, 21 Jun 2020 12:14:13 -0500
Cc: shop-talk <shop-talk@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: shop-talk@autox.team.net
References: <539CF063-87BC-4D62-955D-1D7F2CF09AFD@groupwbench.org>
Jim,

Before Iâ??d try anything like this Iâ??d look into why the tile(s) came loose 
to start with. If there is a continuing cause for the failure, resetting the 
tile will be temporary At best. If the cause has been corrected, then go ahead 
& try something. If it works, great!

Peace,
Pat

Pat Horne 
We support Habitat for Humanity


On Jun 21, 2020, at 12:09 PM, Jim Franklin <jamesf@groupwbench.org> wrote:

I have a lot of partially loose kitchen floor tiles. Before I do the 
unthinkable I'd like to try a shortcut. I've seen a few videos of this product, 
plus one of a guy injecting epoxy under the loose tile. Have you had any 
success (or failure) with anything like this?

thanks,
jim
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com

_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net

<Prev in Thread] Current Thread [Next in Thread>