A 10mm Allen Socket that is about six inches long will just barely clear the
camshafts. A short one and an extension will not clear them.
Jim
-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Bob
Sent: Saturday, May 27, 2006 6:32 PM
To: shotimes@autox.team.net
Subject: [Shotimes] Tool to Remove Heads
I was trying to remove the heads with a 10mm allen head socket, but I can't
remove three of the bolts because the socket interferes
with the intake camshaft. What tool should I be using?
-- Bob
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.7.2/349 - Release Date: 5/26/2006
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.7.2/349 - Release Date: 5/26/2006
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
|