Craig, if my memory serves me correctly (it probably doesn't, but here
goes) Those wires go back and connect to your backing light switch which
is located on your transmission. (one should have power though)
anybody else have any ideas.
At 10:08 AM 1/24/99 -0500, Craig wrote:
>As I posted the other day, I know wires but I don't know much more than
>that!
>I just sell-em...
>
>Question,
>The harness coming out of the firewall just beneath the Master cylinders has
>two wires with a push in type connector on them. One wire is solid green and
>the other is green with a red stripe. The length of these are about six
>inches. What, where and all that stuff ?
>
>I plugged in a volt/ohm meter and they have no power if the ignition is
>turned on.
>
>Craig Smith
>71 Spit
>
>
>
>
Patrick Bowen
'79 Spitfire
Jacksonville FL
|