Re: Sluggish Tach

[Jeff Gruber <jgruber@demainsoft.com>]

Would it make sense to take the tach apart and clean it out?  Is it 
something a mortal could fool with?

At 11:38 AM 7/20/00 -0400, Nolan Penney wrote:

>I have the same problem (if you want to call it a problem).  I figure it's 
>either a continuity problem due to corrosion, or old dried out lubrication 
>holding the needle momentarily.  I'm inclined to suspect the continuity in 
>my case.