In a message dated 7/29/2000 6:42:23 PM Eastern Daylight Time,
s1500@uswest.net writes:
>
> I took out one of the spark plugs and touched it to the block while trying
> to start it. Nothing. No spark at all.
Take the distributor cap and rotor off and watch the points gap while turning
the engine over. There should be a low-voltage spark there. Check the gap
there also, if they don't open, you'll get no spark.
"If it's not fun, why do it?" Ben & Jerry
Clark W. Nicholls
CWNicholls@aol.com
http://members.aol.com/CWNicholls
fax: 419-844-7564 (yes, 419)
phone: 413-243-3433
|