1/16" to an 1/8" should be just fine!
Paul Tegler wizardz@toad.net http://www.teglerizer.com
----- Original Message -----
From: "stu bollen" <bollen@attglobal.net>
To: <triumphs@autox.team.net>; <spitfires@autox.team.net>
Sent: Friday, September 01, 2000 10:00 AM
Subject: SU carb question
On the HS carb, does anyone have reliable info on where the fuel level
should be in the jet. After adjusting the float level according to the
Haynes SU manual, I estimate the fuel level is about 1/8" below the top
of the jet. Is this about right?
Thanks,
Stu
Spit Mk3
|