David Templeton wrote:
> Good evening all,
>
> I have a general question, I managed to crawl under the TR3a and to my
> surprise I find primer overspray on the nicely finished epoxied frame. I can
> scratch it with my fingernail, but obviously I can do that for entire frame.
> Any idea how to get it off and not damage the epoxy?
>
> Thanks
> David A. Templeton
> '59 TR3a
> '74 spitsix
>
>
David
Use over spray clay by Meguiars available from Carquest in Canada.
You simply spray the offending area with detail spray and then rub the clay over
the area and it removes the over spray. I used it on the body of my TVR to
remove
over spray from DPO painting the headliner and had terrific results. Car is
painted with base coat clear coat so I'm sure it won't harm your epoxy coated
frame.
Wear rubber gloves when your using it or your fingers will be black for awhile.
Hope this helps
Chris Taylor
75 Spitfire
74 TVR 2500M
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
|