spitfires
[Top] [All Lists]

Re: head thickness

To: Vic Whitmore <vicwhit@rogers.com>
Subject: Re: head thickness
From: Joe Curry <spitlist@gte.net>
Date: Fri, 01 Mar 2002 19:18:12 -0700
Rather than measuring the head thickness, you should really be measuring the 
thickness from the surface that mates with the block to the top of the
combustion chamber.  That is the important part!  There is a possibility that 
the upper part of heads from various suppliers may be different and
therefore lead to erroneous assumptions.

Joe

Vic Whitmore wrote:
> 
> Hi Paul,
> 
> I dug through my old emails to find this one I sent to Bob Harris in March of
> last year.
> 
> "I've been practicing my port and polishing on a 1500 head marked RKC0589. 
>AFAIK
> it is a replacement head. It measures out to 3.052". I have no reason to 
>suspect
> that it has been shaved."

///  spitfires@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool


<Prev in Thread] Current Thread [Next in Thread>