If it's not simple and if as Alex says Crane is better, there's no way I'm
gonna fool with it.
I'm the do-it-if-it-is-simple-otherwise-leave-it-alone mechanic.
Thanks Joe and Alex
At 05:04 PM 6/18/2003 -0500, spitlist@verizon.net wrote:
>Jeff,
>In my experience, you won't be able to simply take the crane out and
>replace it with the Pertronix. This is because you have to modify the
>distributor for the Crane and the Pertronix used the standard distributor
>and the posts where the points connect. I bet if you look, those posts
>are no longer there. If you want to use the pertronix, you will likely
>have to buy a different distributor or at least a new base plate.
>
>Cheers,
>Joe
> >
> > From: Jeff Gruber <jgruber@demainsoft.com>
> > Date: 2003/06/18 Wed PM 03:33:19 CDT
> > To: spitfires@autox.team.net
> > Subject: pertronix and crane electronic ignition
> >
> >
>
>Content-Type: null;
> name="replyAll"
>Content-Disposition: inline;
> filename="replyAll"
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|