Well, it has to have a bit of a bend in it, so that it can go slightly
beyond the highest point so the weight of the bonnet will hold the prop in
the right position - until a slight gust of wind blows, pushing the bonnet
open again then releasing it onto your head... (if that is at all clear).
But that looks a bit too bent as far as I can tell.
Richard & Daffy
This email and any attached files are confidential and copyright protected.
If you are not the addressee, any dissemination of this communication is
strictly prohibited. Unless otherwise expressly agreed in writing, nothing
stated in this communication shall be legally binding.
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|