spitfires
[Top] [All Lists]

Spitfire resurrection

To: "spitfires@autox. team. net (E-mail)" <spitfires@autox.team.net>,
Subject: Spitfire resurrection
From: "Smith, Brian (Inland-Gaylord)" <BrianSmith1@templeinland.com>
Date: Mon, 2 Feb 2004 15:32:55 -0600
Listers,

After a noble attempt with the dual SU's on my '72 Spitfire, I decided to
return to the single Stromberg.  I rebuilt the carb (using a kit purchased
from AutoZone no less.) and bolted it in place.  Fired up almost
immediately.  Now the problem, I've lost the two special bolts for the air
cleaner.  Does anybody have a couple of extra, or does anybody know what
size thread they are (figure I could buy some standard bolts and make some
sleeves to prevent collapsing the filter housing).

Brian Smith
Inland Paperboard and Packaging
Bogalusa Mill

**********    Confidentiality Notice    **********
This electronic transmission and any attached documents or other
writings are confidential and are for the sole use of the intended
recipient(s) identified above. This message may contain information
that is privileged, confidential or otherwise protected from disclosure
under applicable law. If the receiver of this information is not the
intended recipient, or the employee, or agent responsible for delivering
the information to the intended recipient, you are hereby notified that
any use, reading, dissemination, distribution, copying or storage of this
information is strictly prohibited. If you have received this information in
error, please notify the sender by return email and delete the electronic
transmission, including all attachments from your system.





<Prev in Thread] Current Thread [Next in Thread>
  • Spitfire resurrection, Smith, Brian (Inland-Gaylord) <=