Grant,
Have you pulled the sender out of the tank. The floats will leak over time
and cause the reading to be off. My float is 1/4 full of gas and I'm just
waiting for needing other parts to place an order.
Make sure to wait till you have less than 1/2 a tank of gas before removing
the sender.
Bob Berger
78 Spitfire
> From: Grant Buss <buss3@rogers.com>
> Date: Sun, 1 Jul 2007 10:16:38 -0400
> To: spitfires-list <spitfires@autox.team.net>
> Subject: [Spits] Gas guage
>
> Morning everyone
> I have a slight problem with my gas gauge. It reads a 1/4 tank off. When it
> shows 1/4 tank it is really 1/2 tank. My Temp gauge appears to be OK. I don't
> think there is anything wrong inside the tank. I think the voltage at the
> gauge should be 10 volts. How do you test it?
> Thanks to everyone Grant
> _______________________________________________
> Spitfires mailing list
> Spitfires@autox.team.net
> http://autox.team.net/mailman/listinfo/spitfires
_______________________________________________
Spitfires mailing list
Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires
|