Bill G wrote:
> I have assembled all of the parts to convert the
> gearbox in my '74 Spit to OD - except the shift lever.
You have the rear engine mounting bits, i.e. the plate that sits across the
frame sections and the vertical H-bracket that holds up the back of the OD unit?
The shift lever itself probably isn't much different except that it has a hole
through it for the wires to run up to the knob which contains the switch, and
maybe the ball joint pivot at the bottom is different. The biggest thing
different is the extension bracket that holds the bottom of the lever and the
back end of the shift linkage.
Sorry, I dont have any of these pieces. I just find it interesting that you'd
have all these but need the shift lever itself.
Jim Muller
_______________________________________________
Spitfires mailing list
Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires
|