spridgets
[Top] [All Lists]

Re: tach

To: spridgets@Autox.Team.Net
Subject: Re: tach
From: John Colosimo <jcolosim@tbcdsb.on.ca>
Date: Thu, 7 May 1998 10:15:16 -0400
In-reply-to: <3550E5E3.FB0ABAF1@bellsouth.net>
References: <l03102801b1762d8fc4fa@[205.207.71.26]>
Reply-to: John Colosimo <jcolosim@tbcdsb.on.ca>
Sender: owner-spridgets@Autox.Team.Net
Hi mark,
The part I am trying to identify is in the lower left corner when you look
at it from the face side.  Just above the black 75 ohm 5% resistor.  It
appeared to have been a flat bit of ceramic with a wire soldered to each
side of it.  The ceramic has crumbled up.

John Colosimo


>If it was the capacitor that exploded it was 2.2 MFD.  Anything close
>will work but you will need to calibrate if after the fix.




<Prev in Thread] Current Thread [Next in Thread>