spridgets
[Top] [All Lists]

Re: Midget engine removal

To: tsherman@tecinfo.com, spridgets@Autox.Team.Net
Subject: Re: Midget engine removal
From: LRuggi2635@aol.com
Date: Fri, 5 Jun 1998 08:07:10 EDT
Reply-to: LRuggi2635@aol.com
Sender: owner-spridgets@Autox.Team.Net
Tyson--from personal experience (the hard way): pulling both together requires
a pretty steep transmission-down removal angle, so be sure to drain the tranny
oil beforehand!  Failure to do so will almost ensure copious leaks out the
tail shaft into the transmission/driveshaft tunnel (big mess). 

Larry Ruggiero
'72 MGB
'65 Sprite

<Prev in Thread] Current Thread [Next in Thread>