spridgets
[Top] [All Lists]

Re: Fiberglass Floorboards (was Re: DIY Carpet DPO)

To: "Frank Clarici" <spritenut@Exit109.com>, <Ajhsys@aol.com>
Subject: Re: Fiberglass Floorboards (was Re: DIY Carpet DPO)
From: "George Procyshyn" <geopro@cyberdrive.net>
Date: Mon, 18 Jan 1999 20:38:54 -0500
Cc: <spridgets@autox.team.net>
Reply-to: "George Procyshyn" <geopro@cyberdrive.net>
Sender: owner-spridgets@autox.team.net
Frank
So you're saying if you COULD HAVE painted BOTH sides of the rusty metal you
think the POR15 would have stopped the rust?
George Procyshyn

-----Original Message-----
From: Frank Clarici +ADw-spritenut+AEA-Exit109.com+AD4-
To: Ajhsys+AEA-aol.com +ADw-Ajhsys+AEA-aol.com+AD4-
Cc: Lancer7676+AEA-aol.com +ADw-Lancer7676+AEA-aol.com+AD4AOw- 
spridgets+AEA-autox.team.net
+ADw-spridgets+AEA-autox.team.net+AD4-
Date: Monday, January 18, 1999 8:15 PM
Subject: Re: Fiberglass Floorboards (was Re: DIY Carpet DPO)


+AD4-If you can not paint the inside of the rust it will creep to the edges
+AD4-of the metal where it continues to eat away untill there is no more
+AD4-metal to eat then the floor falls out.
+AD4-At least it did on me.

+AD4-Frank Clarici
+AD4-Toms River, NJ
+AD4-Lots of LBCs
+AD4-http://www.exit109.com/+AH4-spritenut


<Prev in Thread] Current Thread [Next in Thread>