Chuck,
it is the bishings that are soldered into the A-arms that get worn. You
can buy rebuilt A-arms for around $75 or replcae the bushings if you have
an acetylene torch.
You can refer to my web page if you want to do that
http://students.washington.edu/ulix/SpriteSusp.html
Ulix
On Sat, 20 Mar 1999 Cfgraf@aol.com wrote:
> Ok, I got to drive the 59 I bought a year ago, finally! Immediately the
> bushings on the upper fulcrum pin fell to pieces. It looks pretty simple to
> replace them, but I noticed some play in the lower fulcrum pin. The picture
> in the book looks like this is impossible unless the A frame is shot. What is
> worn out here? I would like to get the parts before I tear it apart.
>
> Any hints on getting the lower fulcrum pin out?
>
> Chuck Graf
> 59 AD (Almost Drivable) Sprite
>
Ulix __/__,__ ___/__|\__
..............................................(_o____o_)....<_O_____O_/...
'67 Sprite '74 X1/9
|