I think I missed the original message on this subject but if someone is
trying to mount the Minator wheels with standard lug nuts, STOP. You must
use the proper lug nut. The nuts are made to go down inside the hole in the
wheel not mate against the wheel itself. The holes in the wheels are way
bigger than the studs.
Larry Miller
----- Original Message -----
From: <Daniel1312@aol.com>
To: <adrian@workgroup.net>; <jurban@p3.net>
Cc: <spridgets@autox.team.net>
Sent: 11 May, 1999 1:04 PM
Subject: Re: Wheel studs
> In a message dated 10/5/1999 12:27:04PM, adrian@workgroup.net writes:
>
> << I think my lug nuts are tapered and kind of go
> down into the holes in the wheels.
> >>
> CORRECT and this is an important safety point when fitting alloy wheels.
>
>
> Daniel1312
>
|