Well, there were two in the box I bought yesterday. :-)
I'll use one on each one of my cars...
It is being welded onto my Fiat header as we speak/type.
Ulix
On Mon, 17 May 1999, Hanna, Mark wrote:
> Ulix ,
> Why Two non-foul adapters ?
> Mark
> > -----Original Message-----
> > From: Ulix Goettsch [SMTP:ulix@u.washington.edu]
> > Sent: Monday, May 17, 1999 12:19 PM
> > To: Michael Graziano
> > Cc: Spridgets (E-mail); MGList (E-mail); 'Spitfires'
> > Subject: Re: FW: Air Fuel Gauge
> >
> > Michael,
> > you can do the same for ~$80 by getting the parts separately.
> > $30 Gauge from Summmit Racing
> > $47 O2 sensor from auto parts store
> > $ 4 Set of 2 Sprak plug non-foul adapters
> >
> > Ulix
> >
> > On Mon, 17 May 1999, Michael Graziano wrote:
> >
> > > This is the response I received from Force EFI regarding their digital
> > > mixture gauge. While I won't be purchasing within the next month, I'd
> > like
> > > to get this. THe engine must really RUN betore I retune the carb. If
> > > anyone is interested in these, maybe we can purchase as a group and get
> > a
> > > discount.
> > >
> > > The web site is here: http://force-efi.com/cyber.htm and they're
> > cyberdyne
> > > gauges. Of course, if anyone has a cheaper source, or knows of better
> > > gauges for similar cost....
> > >
> > > Michael
> > > '78 Midget
> > >
> > > -----Original Message-----
> > > From: RKoeppel@aol.com [mailto:RKoeppel@aol.com]
> > > Sent: Friday, May 14, 1999 9:00 PM
> > > To: mgrazian@ltcm.com
> > > Subject: Re: Air Fuel Gauge
> > >
> > >
> > > In a message dated 5/14/99 1:26:00 PM Eastern Daylight Time,
> > > mgrazian@ltcm.com writes:
> > >
> > > << Can this gauge be used in my car, and what hardware does it require?
> > > How
> > > much of it doesn't not come with the kit? Can you tell me a little
> > about
> > > how it works? >>
> > >
> > > You would need the gauge, sensor, and bung to weld into the exhaust. The
> >
> > > total would be about $110. The sensor reads the remaining O2 in the
> > exhaust
> > > and displays an increasing scale from rich or lean on the gauge ,
> > >
> > > Rob
> > > Force EFI
> > > 305-235-6160
> > >
> > >
> > >
> > >
> > > <michael graziano wrote:>
> > >
> > > Hi,
> > >
> > > I'd like some information on the Air/Fuel gauge (CYB-7009). I have a
> > stock
> > > 1978 normally aspriated MG Midget which uses a Zenith Stromberg single
> > > barrel carburator (CD140) on a 1500cc 4 cylinder engine.
> > >
> > > I'd like to fine tune and maintain it with a gauge similar to one you
> > have
> > > for sale.
> > >
> > > Can this gauge be used in my car, and what hardware does it require?
> > How
> > > much of it doesn't not come with the kit? Can you tell me a little
> > about
> > > how it works?
> > >
> > > If you need any other information about the car, please email me either
> > > here, or at mgraziano1@hotmail.com.
> > >
> > > Thank you in advance.
> > >
> > > Michael
> > >
> > > _____________________________________
> > > / \
> > > | Michael Graziano |
> > > | Long Term Capital Management L.P. |
> > > | Phone: 203-552-5706 |
> > > | Fax: 203-553-5869 |
> > > | Email: mgrazian@ltcm.com |
> > > \_____________________________________/
> > >
> >
> > Ulix __/__,__ ___/__|__
> > ..............................................(_o____o_)....<_O_____O_/...
> > '67 Sprite '74 X1/9
>
Ulix __/__,__ ___/__|__
..............................................(_o____o_)....<_O_____O_/...
'67 Sprite '74 X1/9
|