Have you tried to make up a gasket out of something else?
I would say that sleeved MCs are sometimes known to weep fluid around the
sleeve, but if you are sure you have isolated the leak to the top gasket,
I'd buy a sheet of some other gasket material (Rubber? that's what the
seals are.) and give that a try.
I have heard of heavy 'grocery bag' type paper being used for gaskets in a
pinch and that will certainly wick liquids, so I suppose it's not
impossible.
Phil Vanner
new MC, no more spots on my shoes.
-----Original Message-----
From: Dave Vrba [SMTP:Dave_Vrba@mail.sel.sony.com]
Sent: Tuesday, June 08, 1999 8:05 AM
To: spridgets@autox.team.net
Subject: Gasket material, wicking?
Listers:
Here's a weird one for ya. Can some gasket material actually have a
"wick effect" with the fluid it is trying to keep in, causing a LEAK?
I replaced both gaskets in the dual bore master cylinder on the '62
Sprite when I had it sleeved. I have a slight nagging brake fluid leak
that is evident by the fluid pooling in the peddle plate. (Small
pool. You know how any liquid on a flat surface looks like the dam
broke)
It looks to me that the top gasket is "wicking" the brake fluid out
and down the outside of the body. I have isolated the leak to this
area by putting a dark paper towel, secured with a rubber band, around
the top of the master and no more pooling in the peddle plate. The
paper towel is absorbing the LEAK so to speak.
This top gasket is a gray thicker material as I remember. Kinda
spongy. I've honkered down the top plate screws to their limit, I
feel, and don;t want to brake or strip anything. My gut feeling is to
just change out the gasket with a new one and see if it stops the
leak. What do you think? Is this top gasket thick or thin material?
TIA,
Dave
'62 Sprite MKII
Dublin, CA
Thought for the day --
Don't argue with idiots. They won't know when you win!
(changed my life)
|