Re: Final Front Suspension Q's

Jason,

Allignment can be done "to run" by using a long straight edge to span from 
back tire to front.  Raise it up about 5" so it contacts both sidewalls of 
both tires.  Move it from left to right until each front tire has equal tow 
in (zero for radials).  If you do this carefully, you will be amazed by the 
reading on an allignment rack (given a tight front suspension).  Test drive 
carefully.

John Carey (61 Bugeye @>
http://ourworld.cs.com/JCareyPage/JCareyPage.htm