Hey List,
In the process of installing a Datsun 5-speed in the 74 I need to remove the
pilot bearing
from the 1275 crank. How? I tried my mechanic's method of filling the hole with
grease and
then pounding the clutch alignment tool with a hammer. Well I destroyed the
alignment tool
but didn't budge the bearing. A bearing extractor at NAPA is 60 bucks. There
has to be a
simple way of removing it. Any answers out there.
Thanks
Andy Weaks
74 Midget
70 Midget
60 MGA
00 Tacoma
98 CRV
88 Trooper
86 S-15
90 CRX
and somewhere a 56 Chevy
|