Re: My Fault Again!

At 11:38 AM 8/28/2001, Mike MacLean wrote:
><SNIP>
>  I apparently over tightened the center screw for the top cap.  I went to 
> remove the cover
>this morning to look for gunk in the screen below the top and it was
>loose!  The threads were stripped in the threaded hole in the pump
>body.

Mike,
         Use one of the thread forming products. Loctite, JB Weld, etc. 
Should work fine.
         Peter C
                 we tight.... but not TOO tight