The carbon release bearings last every bit as long as the clutch facing.
Why should it be longer? The roller bearings with which I have had
experience don't. Realize this, though, there is no wear on clutch
components until your foot touches the pedal.
Peter C
======
At 03:17 PM 2/4/2002, Clayton La Baw wrote:
>List -
>
>I'm pulling the engine/trans on my '67 Sprite since the pivot hardware for
>the clutch throwout arm fell off inside the bell housing. I'm replacing the
>gearbox with a newer (and hopefully better) 'box thanks <SNIP>
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|