Hi Dave,
This is an easy one! The knurled one with crimped housing was stock to the
early Bugeyes. The bolted together came along later and it would probably
be real tough to say when. I wonder if they are dated?
Mike C (not related to Peter at all!!)
----- Original Message -----
From "David Woerpel" <dwoerpel at wi.net>
Cc: <spridgets@autox.team.net>
Sent: Tuesday, March 18, 2003 11:27 PM
Subject: Re: smiths tach reduction gearbox on ebay
> OK, here we go. Can anyone tell me at what point this particular tack
> drive model was used on Sprites? There is another model out there with
> a knurled brass fastener rather than the brass hex nut and a crimped
> housing rather than bolted together. Which came first; more to the
> point which was used on the Bugeye? I called Terry Horler and he is not
> sure.....what say you guru's?
>
> Dave
> 59 :{)
> 59 MGA 1500
>
> Josh wrote:
>
>
>http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6763&item
=2407762556&rd=1
> >
> >Bid high bid often! -Josh
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|