This may sound cheesy, and look cheap, (it is a cheap fix), but it works.
To keep your front sway bar from moving from side to side, make "keeper clamps"
from a one one inch piece of heater hose (appropriate size). Split hose down
the side and slip over the sway bar next to the bushing and clamp. Hold the
hose piece in place with a heater hose clamp, or a U bolt of the right size.
Make up as many as you need. If you hunt around in a machine shop, or supply
store you may also find some two piece bar clamps that fix with allen screws.
I have the picture of them in my head, but can't find the right port to plug my
noggin into my computer.
RedMidget
---------------------------------
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|