I've done it both ways - if you get my drift!
threaded studs take longer,
but jack is quick and easy!
Guy
> ----- Original Message -----
> From: "chuck" <cciaffone@earthlink.net>
> To: "spridget list" <spridgets@autox.team.net>
> Sent: Thursday, April 24, 2003 3:54 PM
> Subject: Re: FW: Coil spring removal
>
>
> > I definitely come down on the hydraulic jack
> > method. Used that when I rebuilt the front end
> > on my '72. Worked a treat. Had the car on jack stands,
> > and used the trolley jack to lower the wishbone
> > slowly, releasing the spring.
> >
> > chuck (no, not that Chuck!)
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|