As an addition. there is a very short 7/16 bolt, I believe, that is
specifically for that purpose. On most of the Spridgets that I have parted
out the ground wire has been on the angle bracket that actually holds the
strap for the tail-pipe from the lower bellhousing flange and to the captive
nut with short bolt on the underpan.
Mike C
----- Original Message -----
From "Frank Clarici" <spritenut at exit109.com>
To: "Phil Nase" <nase@ptd.net>
Cc: <Spridgets@autox.team.net>
Sent: Thursday, November 11, 2004 7:18 PM
Subject: Re: engine ground
> Phil Nase wrote:
> > Can anyone tell me where the engine ground strap is attached on the
> > engine and chassis on a Bugeye.
>
> From the slave cylinder (or sometimes the lower engine/bellhousing bolt)
> to a bolt just to the right of the slave on the underside of the floor
>
> --
> Frank Clarici
> Toms River, NJ
> The BETTER not BIGGER Healeys
> http://www.exit109.com/~spritenut
|