What you found are period aftermarket mats. They were 8 piece sets with
2 rubber mats per side, 1 fore and 1 aft of the frame member under the
seats and 2 aluminum pieces per side to cover that frame member and the
frame member on the side of the forward part of the transmission tunnel.
Factory floormats covered the entire area described above with a
one-piece rubber mat or considerably thinner material. Factory mats had
no logos.
I believe Horler's book has pictures of the original factory mats.
Actually there is a vendor on ebay from Maine that has a considerable
stock of the mats you describe in black.
--
jay fishbein
wallingford, ct
http://home.ix.netcom.com/~type79/ <http://home.ix.netcom.com/%7Etype79/>
KrkLH@cs.com wrote:
>
>They have the Sprite logo on the bottom.
|