Re: Suspension setup sequence?

["rob" <19to1tr6@comcast.net>]

You should not get a large swing in CR wght after small changes  in toe   To 
set  CR wght  Get a test wedge( small medium  large) screw driver  >> Ues it 
under the spring  in and out till you the CR iswere you wnat it  then make a 
permint size wedge     good luck   rob
----- Original Message ----- 
From: <Gt6steve@aol.com>
To: <FOT@autox.team.net>
Sent: Tuesday, April 05, 2005 10:14 PM
Subject: Suspension setup sequence?


> Amici,
> I've been playing with the setup on the GT6 the past couple of days.  I'm
> still measuring and not yet tweaking.  The car has a decided list to 
> starboard,
> about one degree low on the drivers side with 200 Lbs in the seat.  My 
> thinking
> is that corner weights should be optimized before I set any toes.  Does 
> that
> seem right?
>
> In addition, can anybody see a tricky way to adjust corner weights on the
> rear transverse spring?  Chuck Gee's brilliant Spitfire solution doesn't 
> readily
> transfer to the GT6...
>
> Steve Smith