spridgets
[Top] [All Lists]

Re: Bleeding the Clutch Hydraulics

Subject: Re: Bleeding the Clutch Hydraulics
Date: Tue, 03 May 2005 01:11:41 -0400
Cc: Spridgets <spridgets@autox.team.net>
References: <43840a7e0505021003e065dc1@mail.gmail.com> <5188075.1115078360456.JavaMail.wrongwayricky@mac.com>
User-agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7.2) Gecko/20040804 Netscape/7.2 (ax)
Tip from a big Healey book or article. Disconnect the rod from the 
clutch fork after bleeding the cylinder. Open the bleeder and push in on 
the rod to force the fluid back and at the same time up out the bleeder 
then tighten before letting go of the rod. This made a BIG difference in 
the 3000 when I bled it. Seems there's a small pocket in the slave that 
never gets out because it is beyond the bleeder.

Dave & Bobbie





<Prev in Thread] Current Thread [Next in Thread>