spridgets
[Top] [All Lists]

Re: Need instructions for Eastwood tank cleaning

To: "Jim Johnson" <bmwwxman@gmail.com>, "Charlie Shelden" <shelden3@pldi.net>
Subject: Re: Need instructions for Eastwood tank cleaning
Date: Sun, 18 Dec 2005 19:03:03 -0800
Cc: <spridgets@autox.team.net>
References: <006001c6041f$6da82070$6401a8c0@homegxgvmjlpli> <43840a7e0512181714x335251fayfbcbc669e0b92370@mail.gmail.com>
Easy fix on that, Jim.

Just poke a hole in the screen after the coating has dried and take care of
the trash with in line filters.

Pa

----- Original Message ----- 
From "Jim Johnson" <bmwwxman at gmail.com>
To: "Charlie Shelden" <shelden3@pldi.net>
Cc: <spridgets@autox.team.net>
Sent: Sunday, December 18, 2005 5:14 PM
Subject: Re: Need instructions for Eastwood tank cleaning


> Charlie,
> I looked at doing this with my Midget but the group talked me out of it.
> I've done several motorcycle tanks and thought the same methods would
> work on the Spridget but there are complications. There is a very fine
> mesh screen filter inside the tank. You can see it if you look through the
> appature where the fuel sensor goes with a flash light. You can't use
> a tank liner, otherwise you will plug up this filter screen!
> Cheers!!
> Jim - he of the stationary Midget in Dodge City
>
> On 12/18/05, Charlie Shelden <shelden3@pldi.net> wrote:
> >
> > I have an eastwood tank cleaning kit (3-part) need the instructions as
far
> > as what part is first, I know the sealer is last.  But as far as the
> > muratic
> > dilution goes, need that as well.
> >
> > Thanks,
> > Charlie
> > 59 Frogeye, Sprite, Bugeye etc...




<Prev in Thread] Current Thread [Next in Thread>