Hello ,
while this might not be the "accepted" solution .. this is what
i did that works.....
not only does one side of the rear "sag", but the opposite
corner of the front is "high" .. measured to the top of the
wheel arches... or it did... .. sound familiar?.. if so
i replaced the bolts that hold the spring pan on the front
passenger side, (the high front side) with longer ones, and
spaced the pan down using 3/8" flat washers... i went three
thick for a change of 3/8 " (1/8" apiece)... i could have used
a couple more, but not the car sits nearly flat. ...
maybe, just maybe the SET that these cars take doesn't have to
do with the rear springs, (i've heard of MANY instances where
changing the rear springs has NOT helped) but rather with one
of the front spings loosing ITS length?
lister comments?
--
Best regards,
Bill mailto:pythias@pacifier.com
"66 Sprite
|