Granted, it's a bare shell in the picture, but you can put a 2x4 across
the car just in front of the spring shackles, and put the jackstands
under that.
http://home.comcast.net/~kvcbk/right_primer.jpg
http://home.comcast.net/~kvcbk/rear_susp.jpg
The sills are quite strong enough.
-=Chris
<-----Original Message----->
From: Adrian Jones
Sent: 4/14/2006 7:48:59 PM
To: spridgets@autox.team.net
Subject: Come on, someone must know this...
Hi Folks,
I'm about to swap one rear spring set with the other side.
Apparently, the rear axle needs supporting and the car itself needs
jacks under it before the springs can be removed.
I'm not sure where to put the jack stands that support the car - there
doesn't seem anywhere that looks strong enough.
Thanks in advance for any advice.
Adrian, 1500 Midget
|
