bushwacker4@zoomtown.com wrote:
>Welcome back David! Could be air in the lines but that would give the pedal a
>spongy feel. If the pedal is firm, look for wear/play in the hinge points of
>the system. Also check the clutch fork for straightness... I have seen them
>bend! If it is bent, the pushrod will be too short. You can lengthen it but
>make sure that the fork has clearance to move all the way back when the pedal
>is depressed. If it hits the back of the hole in the bellhousing it won't work
>any better.
>
>
I'm having a similar problem with our '70 Midget. How much should the
pushrod move when you press the clutch pedal?
Thanks,
Dave Ambrose
--
------
Sure, "Scrum" is a weird name, but "Assault and Battery" was already taken.
|