spridgets
[Top] [All Lists]

Re: Bugeye Neg Earth Conversion

To: spridgets@autox.team.net
Subject: Re: Bugeye Neg Earth Conversion
From: "Bud Pazur" <bpazur@excel.net>
Date: Wed, 4 Oct 2006 11:12:40 -0500
Paul A wrote: 

No need to switch "All the wires around", just turn the battery 180, hook up 
the cables, if they'll fit, otherwise get new ones, repolarize the 
generator, swap the coil leads, install a new condensor and that's all 
that's needed for that. 

To repolarize the generator, lightly brush the F terminal on the regulator 
with a hot jump wire from the plus terminal of the battery.  NO DEAD short 
on that bit, just light brushing over it with light sparks.  Once will do 
it. 

Now you have the tach to rewire, Frank will give that routine. 

Paul A 



Paul - Thanks very much. 

No need to worry about the tach- mine is mechanical driven of the back of the 
generator. 

But - why do I need to change the condenser - that is not in my other 
instructions. Is it for electrical reasons or just for reliability? Do I need 
a special condenser, do I mount it the same way? 

Thanks again. 

Bud 




<Prev in Thread] Current Thread [Next in Thread>