spridgets
[Top] [All Lists]

Re: [Spridgets] Tranny swap issues

To: "'Paul Asgeirsson'" <PAsgeirsson@worldnet.att.net>
Subject: Re: [Spridgets] Tranny swap issues
From: "Herby" <herby@herbytoys.com>
Date: Wed, 22 Aug 2007 20:52:55 -0700
Sorry, I've never had that happen before. How about I try decimals?  The OD
old DPO is .750 and the new one is .625. Both ID at .500. The crank ID
measures about .760.

Herby
63 MKII Sprite (Herbytoy - patiently waiting)
62 MKII Sprite (the "resto-mod" driver)
00 Dakota R/T (the new toy)
herby@herbytoys.com
www.herbytoys.com


-----Original Message-----
From: Paul Asgeirsson [mailto:PAsgeirsson@worldnet.att.net]
Sent: Wednesday, August 22, 2007 8:36 PM
To: herby@herbytoys.com; 'Spridget List'
Subject: Re: [Spridgets] Tranny swap issues

Can't make out the old OD of the pilot bush.  Write it out, please.  It's
square?

Pa


----- Original Message -----
From: "Herby" <herby@herbytoys.com>
To: "'Spridget List'" <spridgets@autox.team.net>
Sent: Wednesday, August 22, 2007 8:19 PM
Subject: [Spridgets] Tranny swap issues


> Okay so I get the 1275 and smoothcase out of the car. I pull off the
tranny.
> I look at the pressure plate and yep its a 6-1/2 inch, so far so good.
(oh
> yeah, this is DPO stuff I havent been into yet). I pop the P.P. off and
> then the flywheel. I check the pilot bushing, it just about falls out. It
> looks odd so I compare with the new one. Old DPO one is > OD and the new
> one is 5/8 OD!! Whats wrong here? IDs on both are the same. The crank
ID
> measures ~ .760. Any ideas?
>
>
>
> Herby
> 63 MKII Sprite (Herbytoy - patiently waiting)
> 62 MKII Sprite (the "resto-mod" driver)
> 00 Dakota R/T (the new toy)
> herby@herbytoys.com
_______________________________________________

Edit your replies

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>