I have a '79 spridget and am redoing the brake lines.
I cross threaded the front to rear line fitting at the main junction
up front - danged tight space to get into - luckily the new one is
brass and only the fitting threads appear to be mangled, and only the
first few at that.
So, I want to run a thread die over the fitting threads, but the dies
I have are not or appear to not be correct (1/8 s.p. and 1/8 b.s.p.)
as they do not run over the old fittings cleanly.
Does anyone know the correct thread die to use?
Edit your replies