[Spridgets] 1098 CG head torque

spridgets

[Spridgets] 1098 CG head torque

To:	"'Spridgets'" <spridgets@autox.team.net>
Subject:	[Spridgets] 1098 CG head torque
From:	"Phil Nase" <nases@verizon.net>
Date:	Sun, 04 Nov 2007 21:04:48 -0500

I could find no specific head nut torque value in my workshop manual for my
1098 CG motor.  The 948 spec was 40 ft lbs so I used that.
I used 25 ft lbs. for the rocker bracket nuts.
 
Sound about right?
 
Thanks.
 

Phil Nase
Quakertown, PA
http://home.comcast.net/~philnasecpa
_______________________________________________

Edit your replies

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Spridgets] 1098 CG head torque, Phil Nase <= Re: [Spridgets] 1098 CG head torque, Peter C

Previous by Date:	[Spridgets] Older than dirt...., WFO Herb
Next by Date:	[Spridgets] Spridget Rocker Arm Needed, Norm
Previous by Thread:	[Spridgets] Older than dirt...., WFO Herb
Next by Thread:	Re: [Spridgets] 1098 CG head torque, Peter C
Indexes:	[Date] [Thread] [Top] [All Lists]