spridgets
[Top] [All Lists]

Re: [Spridgets] exhaust gasket material

To: "Glen Byrns" <grbyrns@ucdavis.edu>, "Spridgets" <spridgets@autox.team.net>
Subject: Re: [Spridgets] exhaust gasket material
From: "Guy R Day" <grday@btinternet.com>
Date: Fri, 4 Apr 2008 22:23:04 +0100
Glen,
Idle curiosity - could you use 2mm or 3mm copper sheet?

Guy R Day


----- Original Message ----- 
From: "Glen Byrns" <grbyrns@ucdavis.edu>
To: "Spridgets" <spridgets@autox.team.net>
Sent: Friday, April 04, 2008 10:15 PM
Subject: [Spridgets] exhaust gasket material


> Bugsy's been down for a week since I discovered that NAPA manifold gasket
> material (the grey stuff on a steel core) doesn't stand up to turbo
> temperatures.  It developed a leak, and on disassembly the gasket was 
> pretty
> much just a bunch of ash clinging to the stainless steel core.  Not a 
> single
> turbo shop on the web or anywhere else could find a gasket to fit the 
> Rayjay
> turbo.  After a bit of research I found a company that sells gasket 
> material
> made of graphite bonded to stainless steel.  Good up to 900F, and two 
> sheets
> are on the way for Monday.  I should have held on to the crappy old ones 
> at
> the last rebuild, oh well.
> If anyone else needs a VERY high temp gasket, enter "graphite gasket 
> material"
> in Google, or e-mail me and deal for my leftovers.
>
> Glen
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as grday@btinternet.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets 
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>