> > OK,,, now i have TWO different answers... Frank
> says right leaner,
> > ron says right richer...
Nope, same answer, just looking at different sides of
the jet nut. Right richer, looking down on the carbs.
But as Frank says, loosen the jet nut to richen.
Tighten to lean. "Loosening" lowers the jet from the
needle. Etc...
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|