spridgets
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Spridgets] Question re. Torque wrench with extension

from [Hal Faulkner] [Permanent Link][Original]
To: "Geoff Branch" <gjbranch@comcast.net>, <dmg@bossig.com>,
Subject: Re: [Spridgets] Question re. Torque wrench with extension
From: "Hal Faulkner" <hal@katemuir.com>
Date: Sat, 14 Jun 2008 20:18:26 -0700 
I believe that co-axial is the correct term here.
Pedantic Hal

-----Original Message-----
From: spridgets-bounces+hal=katemuir.com@autox.team.net
[mailto:spridgets-bounces+hal=katemuir.com@autox.team.net]On Behalf Of
Geoff Branch
Sent: Saturday, June 14, 2008 11:46 AM
To: dmg@bossig.com; spridgets@autox.team.net
Subject: Re: [Spridgets] Question re. Torque wrench with extension


That won't change the setting, as long as you can ensure that it stays 
straight up and down, ie parrellel with the bolt.
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Spridgets] Question re. Torque wrench with extension, Ed's Shop
Next by Date:  Re: [Spridgets] HELP!!!!!, ryan.kubanoff
Previous by Thread:  Re: [Spridgets] Question re. Torque wrench with extension, Ed's Shop
Next by Thread:  Re: [Spridgets] Question re. Torque wrench with extension, David Lieb
Indexes:  [Date] [Thread] [Top] [All Lists]