spridgets
[Top] [All Lists]

Re: [Spridgets] Big Healey long shot.

To: Spridgeteers <spridgets@autox.team.net>
Subject: Re: [Spridgets] Big Healey long shot.
From: Mike Rambour <mikey@b2systems.com>
Date: Wed, 09 Jul 2008 16:16:15 -0700
 Thanks for the help guys, I have found out from Peter C. that they did 
have different bores.

    mike

Mike Rambour wrote:
>  Does anyone have a 100-4 brake master cylinder that they could take 
> some measurements for me ? or better yet close by so I can compare ?
>
>  I know there is a big healey list but I am on too many lists already so 
> thought I would ask here before joining another list.
>
>  One of our members needs a master cylinder for his Singer and the 100-4 
> cylinder looks identical but there is some discussion if the piston size 
> is the same.  I am talking about part 7-076 on this page 
> http://www.victoriabritish.com/Features/AH/AHBR1.htm.
>
>  I have seen the 2 together and I know the bolt holes are easily with a 
> 1/4" of each other, I could not compare that closely but its close, its 
> just the internal diameter that is the concern.
>
>     mike
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as mikey@b2systems.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>