>I can't answer the original question of whether ALL Vega wheels will
> fit, but need to mention that they should not be used with Spridget 3/8
> lug nuts. Some of the after market 3/8, 60 degree lug nuts may work, but
> stock nuts can pull through. Not safe. Racers that used Vega wheels had
> changed over to 7/16 studs with there larger lug nuts.
The 3/8" nuts that come with the Minitor rims work very well with Vega rims.
They use a 13/16" lug wrench and have plenty of meat to keep from pulling
throufh, although you DO have to make sure that they are properly centered
before you torque them down. I believe the Monza/Astre/Sunbird cars also
used 4-on-4. Anyone have an old Monza rear axle laying around?
Support Team.Net http://www.team.net/donate.html