http://www.thermalmaxinc.com/page3.html
...bill in oregon
==============================================
-----Original Message-----
From: spridgets-bounces@autox.team.net
[mailto:spridgets-bounces@autox.team.net] On Behalf Of Ron Soave
Sent: Saturday, October 17, 2009 5:14 AM
To: Spridget; rrengineer @dslextreme.com
Subject: Re: [Spridgets] No LBC - Heat Shields
Look for stuff called "Min K" or Kaowool. It's a wool-like, but a tiny layer
of it will be all you need. I'd goog it for u but am on a mobile (not while
driving!). You may be able to get a sample from a supplier thqt will be all
you need.
--- On Sat, 10/17/09, rrengineer @dslextreme.com
<rrengineer@dslextreme.com> wrote:
> From: rrengineer @dslextreme.com
<rrengineer@dslextreme.com>
> Subject: [Spridgets] No LBC - Heat Shields
> To:
"Spridget" <spridgets@autox.team.net>
> Date: Saturday, October 17, 2009, 4:19
AM
> Sorry to bomb the list, but I thought
> someone might know what kind of
>
material I could use to insulate a couple of heat shield
> brackets and hose
>
clamps on my Harley. I just had two exhaust heat
> shields re-chromed because
> they turned dark and splotched from the heat of my exhaust
> pipes. There
are
> brackets welded to the back of curved sheet metal and hose
> clamps pass
> through the brackets. The hose clamps wrap around the
> exhaust pipes and
>
part of the bracket touches the pipe too. The heat is
> transferred at these
> clamps and brackets causing the problem. Does anyone
> know of a high temp
> gasket material I could put under the hose clamps to stop
> the heat
>
transfer? Re-chroming is expensive!
> Mike MacLean
> 60 Sprite
> 56 BN2
>
_______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|