spridgets
[Top] [All Lists]

Re: [Spridgets] jets for su carbs

To: Kristi & Lambert <kristi74midget@comcast.net>, Spridget List
Subject: Re: [Spridgets] jets for su carbs
From: Peter Caldwell <peter@nosimport.com>
Date: Thu, 29 Apr 2010 16:41:21 -0500
Yes.

The original SU jets had/have a nylon tube wrapped with a steel coil 
spring. The tubes seem to dislike newer fuels, as do similar tubes in 
many small 2-stroke leafblowers, weedwhackers, etc.  They also leak 
at the bowl connection either because of perishing o-rings, or the 
tube will split.

A company, Royze in CA, makes a jet with a tapered plastic ferrule 
for the connection into the bowl, and a slip-on rubber fuel hose for 
that connection and at the jet end. Not original, but to me, a better solution.

I know a guy that carries them.

Peter C.
====
At 04:03 PM 4/29/2010, Kristi & Lambert wrote:
>  Hello everyone,
>
>Can someone tell me, when you buy a jet for an su carb does the line from the
>float bowl come with it. Kristi's car is leaking gas from this line and i need
>to get it fixed asap.
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>