This begs another question, are those bits interchangeable? Or are
they carb model specific?
On Nov 11, 2010, at 10:06 AM, erik nyce wrote:
> The question is "can the motor as built rev quick enough to keep up
> with the fuel air mix as the throttle is advanced." When you
> rapidly advance the throttle does it sputter and then catch? If it
> does not then you are ok. Since you are sorting it out you may
> wish to try it both ways and see which you like better.
> I wonder without knowing if the lack of dampers changes the gas
> Hi all,
> so I have the 1380 in the Bugeye and I still have some fine tuning to
> do but I noticed one thing right off the bat, there are no pistons on
> the carb caps. If you unscrew the cap there is only a rod with no
> brass bit. I'm guessing that this is a go fast racer mod to allow a
> much faster throttle response but is it practical on the street?
> Thanks for you input,
> ey Bugeye Frogeye Sprite Club, please send a blank email to:
> If you no longer want to receive emails, but wish to remain a member
> of the group, you may go to the website
> and change your subscription to "Web Only" and you will not receive
> any emails.
Suggested annual donation $12.75