[Top] [All Lists]

Re: [Spridgets] Gear Reduction Starter

To: spridgets@autox.team.net
Subject: Re: [Spridgets] Gear Reduction Starter
From: Gerard <pixelsmith@gerardsgarage.com>
Date: Sun, 21 Nov 2010 17:42:39 -0800

It will fit and work, but not without modifying the lower corner of  
the footwell. The way the solenoid is oriented, it will not clear the  
sheet metal without cutting out a notch to make room for it. If you  
don't want to do that, you need to get the type with the multi- 
position bracket that allows you to rotate the solenoid into a  
different positions for the application. I can supply you one of you  
wish. Contact me off list if you are interested, but that type is at  
least double the price.


On Nov 21, 2010, at 4:38 PM, spridgets-request@autox.team.net wrote:

> Message: 13
> Date: Sun, 21 Nov 2010 16:06:11 -0800
> From: David Franks <franks97@frontier.com>
> Subject: [Spridgets] Gear Reduction Starter
> To: Spridgets List <spridgets@autox.team.net>, vintage list
>       <vintage-race@autox.team.net>
> Message-ID: <C90EF3F3.AD60%franks97@frontier.com>
> Content-Type: text/plain; charset="us-ascii"
> The Starter in my 67 Sprite finally died. Can someone tell me if  
> this is the
> Isuzu starter that is supposed to work as a replacement?
> <http://tinyurl.com/2afnjvp>
> Ultima - Starter
> Part Number: 17155
> Line: ULT
> Does this unit fit without modification? Can I use it with my  
> externally
> mounted solenoid?
> Thanks!
> -- 
> David Franks
> franks97@frontier.com
> 67 AH Sprite #82 Blue
> www.youtube.franks97

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>