spridgets
[Top] [All Lists]

[Spridgets] Rebuilt 1275cc

Subject: [Spridgets] Rebuilt 1275cc
From: an5.sprite at gmail.com (an5.sprite at gmail.com)
Date: Mon, 11 Apr 2011 00:04:36 +0000
If the engine has never been started I would prime the oil pump before cranking 
it over. You could also lubricate the value mechanism and squirt some oil in 
each cylinder.

Steve
------Original Message------
From: Jess Power
To: spridgets
Subject: [Spridgets] Rebuilt 1275cc
Sent: Apr 10, 2011 6:29 PM

Have a rebuilt 1275cc that turns by hand.Obvious surface rust where  
the water pump goes.Was thinking of back flushing it with water before  
starting it up.Anything else that should be done prior to filling it  
with water,oil,and gas and cranking it up?
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/an5.sprite 
at gmail.com



Sent from my Verizon Wireless BlackBerry

<Prev in Thread] Current Thread [Next in Thread>