team-thicko
[Top] [All Lists]

Re: too good to be true

To: <spridgets@autox.team.net>, <team-thicko@autox.team.net>
Subject: Re: too good to be true
From: "Wm. Severin Thompson" <wsthompson@thicko.com>
Date: Mon, 12 Aug 2002 21:47:26 -0500
Hey y'all,

Yes, I immediately considered cutting the tops of the pison...called
Venolia... Venolia  says I need to keep a minimum of 170 thou, and there's
only 240 thou up there... so just machining the pistons won't cut it.

The other solution is fly cutting the head as well as taking some off the
ppistons... may be our best solution for the time being. (I've got 2 other
race motors "underway"... but this is the closest to being done.

Haven't given up just yet...

Flounder
----- Original Message -----
From: "Wm. Severin Thompson" <wsthompson@thicko.com>
To: <spridgets@autox.team.net>; <team-thicko@autox.team.net>
Sent: Monday, August 12, 2002 5:14 PM
Subject: too good to be true


> ARRRGGGHHHH... ok those of you betting on whether I wouldn't  have a race
> motor together in time for Grattan, are  most likely in the money.
>
> TO make a sad story short, 1st block I'd intended to use was FUBAR, second
> block, all done ready for assembley when we discover the NOS Venolias I
got
> are 100 thou proud of block... either wrong pistons, or someone decked the
> shit out of the block.
>
DAMN!DAMN!DAMN!DAMN!DAMN!DAMN!DAMN!DAMN!DAMN!DAMN!DAMN!DAMN!DAMN!DAMN!DAMN!D
> AMN!DAMN!
>
> Looks like it's stock 1275 time again for Grattan...
>
> WST

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/team-thicko


<Prev in Thread] Current Thread [Next in Thread>